Overhead Stirrer utilizes a patented mixing head that pumps material into the hollow mixing chamber and outward through the chamber openings. The blades on the mixing head are designed to draft material from above and below the mixing head and pull it into the chamber. The suction of the blades and flow through the chamber provide a more homogeneous material mix compared to other mixers which rely exclusively on centrifugal force.
Main Features
- Brushless DC motor drive , penetration type stirring shaft
- MCU closed -loop control , constant and stable rotational speed .
- Digital display and speed setting ,rotary encoder operation
- Easy to maintenance and to use;
- Base of stirrer is covered with special material for fast cooling;
- Overhead Stirrer has protection of rotation parts from liquids
- Head of rotation mechanism allows to install different shafts with diameter from 0,5 to 10 mm for models US-2000 and from 0,5 to 13 mm for models US-2200;
- 2 modes of speed: 60-500 rpm and 240-2000 rpm for mixing different types of viscosity (for models US-2000);
- Wide range of mixing speeds for mixing different types of viscosity (for models US-2200);
- Soft start for preventing from splashes (for models US-2200);
- Indicator of viscosity parameters;
- Engine protection form overload (with indicator);
- Analog control (for models with index A) and digital control ((for models with index D);
- Connection to PC and data transfer, interface RS-232 for models US-2200D).
